Results 81 - 90 for Von Mises yield criterion

Plastic Analysis of Anisotropic Disks and Plates
The material is transversely anisotropic and is assumed to obey either the Tresca or von Mises yield criterion. Analyses indicate that the effect of transverse anisotropy on the ...
http://cedb.asce.org/cgi/WWWdisplay.cgi?0103677
open  pop

browse
... study, the authors reported results from numerical simulations of orthogonal machining of Silicon Nitride using a pressure-independent material model with von Mises yield criterion
http://www.micro.physics.ncsu.edu/publication/browse/getAbstractAction?fileref=2004-12-19%2019:54:27
open  pop

On the Off-Axis and Angle-Ply Strength of Composites
The experimental data were compared with the tensor polynomial failure criterion, assuming the interaction term based on the Von Mises yield criterion for the isotropic materials.
http://www.astm.org/DIGITAL_LIBRARY/STP/PAGES/STP29305S.htm
open  pop

browse
... material model with the von Mises yield criterion. In the present work, the mechanical behaviour of silicon nitride is treated using the Drucker–Prager yield criterion ...
http://www.micro.physics.ncsu.edu/publication/browse/getAbstractAction?fileref=2004-06-21%2018:18:47
open  pop

Blunt Notch Analysis
The analysis was run using plane stress assumptions, and a multi-linear representation of the uniaxial stress-strain curve for 2024-T3 was used in a von Mises yield criterion.
http://www.mne.ksu.edu/~franc2d/examples/blunt.html
open  pop

Yield-line analysis of cold-formed steel members
Based on the von Mises yield criterion, in the fully plastic state (ν=0.5), and assuming only normal and transverse stresses exist for bending about an inclined yield-line axis, new ...
http://www.ce.jhu.edu/bschafer/collapsemech/ijoss%20paper%20yield-lines.pdf
open  pop

Abstracts: Analysis of forming limits using the Hill 1993 yield ...
This criterion describes the material attributes of sheet metals using five ... forming limit diagrams (FLDs) are obtained. A case study, which uses the von Mises yield criterion ...
http://www.faqs.org/abstracts/Science-and-technology/Analysis-of-forming-limits-using-the-Hill-1993-yield-criterion.html
open  pop

Engineering Diffractometer Science - Instrument Systems - Neutron ...
Both phases were seen to obey the von Mises yield criterion. The fibers were observed to yield first and then ...
http://www.sns.gov/instrument_systems/beamline_07_vulcan/VULCAN_userinfo_bmg.shtml
open  pop

Notes Plasticity
... shouldn't happen) •But, not so accurate for some stress states •Doesn't depend on middle normal stress at all •Big problem (mathematically) : not smooth Von Mises yield criterion ...
http://people.cs.ubc.ca/~rbridson/courses/533b-winter-2004/cs533b_slides_mar2.pdf
open  pop

Turkish Journal of Engineering and Environmental Sciences
On the Application of von Mises' Yield Criterion to a Class of Plane Strain Thermal Stress Problems Ahmet N. ERASLAN Middle East Technical University, Department of Engineering ...
http://mistug.tubitak.gov.tr/bdyim/abs.php?dergi=muh&rak=0411-2
open  pop

Featured Results: